An inexhaustible solar recharging system
Work efficiently and in harmony with nature with the solar charger for use with solar panels. The Solerion solar charger adapts to solar panels that meet certain specifications and makes the most of solar energy to optimally recharge the battery and ensure the constant productivity of PELLENC tools.
|Solar panel sockets||MC4|
|Voc (open circuit) voltage||42V +/-2V|
|Vmp voltage (typical)||36 V|
|Imax input (sequential battery charging per battery)||8A|
Standard or quick chargers
Mains chargers optimise battery life
Choose your charge and optimise the service life of your batteries. The three standard PELLENC chargers have a smart communication system which recognises the PELLENC battery. They offer managed charging, which optimises the service life of the battery. The battery cells are charged all at once, unlike many other portable battery packs. Together with the Balance System built into the battery’s electronic programming, the cells are fully balanced and receive equivalent current to restore maximum power levels throughout their long lifespan.
STANDARDS 1,2A – 2,2A – 3,75A
Once the battery is completely discharged, the tool stops automatically and the battery buzzer beeps intermittently. There are 3 models of standard chargers: 1.2 A – 2.2 A -3.75 A max. depending on your needs. The charging time depends on the battery level, the charging environment (dry and ventilated area, protected from dust and with a temperature of between 10° C and 25° C) and the age of your battery.
The 7.6 A quick charger will be useful for boosting the battery charge. With the quick charger, the charging time of the ALPHA 260 and 520 batteries is reduced on average from 1 hr 45 to 2 hrs 30, while 30 minutes to 1 hour is enough to reach 70% capacity. The faster a battery cell is charged, the faster it ages.
Charger and battery charging time
|CHARGERS*||250||ALPHA 260||ALPHA 520||750||1200||1500|
|1.2 A max. standard charger||6 hrs||–||–||15 hrs 30||24 hrs||30 hrs|
|2.2 A max. standard charger||3 hrs 30||3 hrs 45||6 hrs 30||9 hrs||15 hrs||18 hrs|
|3.75 A max. standard charger||–||2 hrs 45||4 hrs 30||5 hrs||10 hrs||12 hrs|
|Quick Charger 7.6 A max.||–||(70%) 0 hr 30
(100%) 1 hr 45
|(70%) 1 hr
(100%) 2 hrs 30
|3 hrs||(90%) 4 hrs
(100%) 5 hrs 30
|(90%) 5 hrs
(100%) 7 hrs
|SOLERION solar charger: 600 W/m2 sunlight||3 hrs 20||2 hrs||4 hrs||5 hrs 45||9 hrs 10||11 hrs 30|
|SOLERION solar charger: 1000 W/m2 sunlight||3 hrs 20||1 hr 10||2 hrs 20||3 hrs 20||5 hrs 10||6 hrs 30|
* Charging time calculated in optimal conditions. Refer to the battery instructions for conditions. The indicated charging times are those required to reach a 100% charge. The batteries can be charged at any time, with no risk of a memory run-down effect.
Power Convertor 1000
Your battery becomes a generator
In its efforts to give you the best possible support in your work, PELLENC has created the Power Convertor 1000, on which any electrical device can be used independently. Combined with a PELLENC battery, the Power Convertor is the solution for using the energy stored in your batteries. Just like plugging into any electrical supply distribution system, the output voltage can be used to run tools with a power requirement of less than 1,000 W, such as drills, jackhammers, or small household appliances.
|Rated power – W||1000|
|Maximum power – W||2000|
|Input voltage – VDC||36 – 52|
|Courant d’entrée maximum – A||55|
|Maximum input voltage – A||230|
|Output voltage (VAC +/- 5% pure sine wave)||4,5|
|Output current to 1000 W maximum – A||50/60|
|Output frequency – Hz||IP20|
|Weight – kg||5.95|
|Battery compatibility||250 – Alpha 260 – Alpha 520 – 700 – 750 – 1200 – 1500|
Caution: do not plug the Power Convertor 1000 into an electrical supply distribution system.
Want more information on this product? Complete the enquiry form here to receive more details, or telephone 01295 680120